DSEAR and wood dust created in a pallet repair premises

Discuss all things fire related.

Moderator: Moderators

Post Reply
LadyLeila
Newbie
Newbie
Posts: 6
Joined: Sat Dec 13, 2008 6:23 pm

DSEAR and wood dust created in a pallet repair premises

Post by LadyLeila » Thu Sep 13, 2018 4:26 pm

Hi all

Could somebody possibly help me as I am a bit confused when DSEAR applies.

I have inspected a large pallet yard where they repair/strip/cut up/make bespoke pallets and heat treat them. The kiln is operated with red diesel which is one tank which is bunded, the fork lift trucks are also operated using diesel. They have a simple LEV system in place but it only covers one of the saws and the quantity they repair/make the pallets and there is a considerable amount of wood dust on the floor. They have been informed that they need to have a DSEAR risk assessment carried out based on these issues. I have advised them to install further control measures to control the amount of wood dust such as additional LEV but I do not think they require a DSEAR risk assessment unless anyone could kindly give me their help and point of view I would really appreciate any assistance.

Thank you in advance of your help
Leila

User avatar
Alexis
Official HSfB Legend
Official HSfB Legend
Posts: 44586
Joined: Thu Mar 18, 2004 10:52 am
Twitter: https://twitter.com/AlexisHSfB
Location: West Lothian
Contact:

Re: DSEAR and wood dust created in a pallet repair premises

Post by Alexis » Fri Sep 14, 2018 8:31 am

Hi Leila. :wave:

Just bringing this one back again.

We do have members whom I know can offer assistance. ;)
"A candle loses none of its light by lighting another candle."

Image

Get Listed for Free on our New Business Directory

LadyLeila
Newbie
Newbie
Posts: 6
Joined: Sat Dec 13, 2008 6:23 pm

Re: DSEAR and wood dust created in a pallet repair premises

Post by LadyLeila » Fri Sep 14, 2018 11:04 am

Thank you I will keep checking to see if some one has been able to help me :D

User avatar
Woodie
Master Craftsman
Master Craftsman
Posts: 5233
Joined: Tue Aug 16, 2005 2:15 pm
Industry Sector: Construction
Location: Highlands Scotland
Contact:

Re: DSEAR and wood dust created in a pallet repair premises

Post by Woodie » Fri Sep 14, 2018 12:48 pm

Has a fire risk assessment been carried?

There should also be consideration with regards the LEV system which would require looking at and there are many companies out there that will advise accordingly.

A little bit of light reading which may help formulate an answer to your question.
http://www.hse.gov.uk/fireandexplosion/atex.htm
WIS 6 & HSG 103 will further guide you in the process.

The HSE's take on wood dust (Reference: http://www.hse.gov.uk/pubns/wis32.pdf) is as follows:

"You should assume that all wood waste is potentially explosive, unless a dust explosion test demonstrates it is not. Wood waste usually has a dust explosion risk where the mean particle size is less than 200 microns, and where as little as 10% of the mixture contains dust less than 80 microns in size. Only weak explosions are likely where the mean particle size exceeds 200 microns".
Truth never damages a cause that is just. GANDHI (1869-1948)

http://www.nott-us.co.uk" onclick="window.open(this.href);return false;

LadyLeila
Newbie
Newbie
Posts: 6
Joined: Sat Dec 13, 2008 6:23 pm

Re: DSEAR and wood dust created in a pallet repair premises

Post by LadyLeila » Sat Sep 15, 2018 10:49 pm

HI Woodie

No they do not have a fire risk assessment, very few fire extinguishers, no training of any of the employees and at the time of my visit the inadequate LEV system was not working. They did not have an industrial vacuum cleaner either to get rid of the excess wood dust either.

I will read through all the links you have kindly sent me, but I just wanted to thank you for taking the time and trouble in explaining this to me.

Thanks again Woodie, very much appreciated
Leila

Post Reply

 

Follow us on Twitter Find us on Facebook Find us on on LinkedIn

Terms of Use Privacy Policy