Can anyone tell me if an aluminium tower has to be tied in to the wall if its over a certain height and if so are there any bespoke devices for this? Any tie in devices i've seen have been for steel scaffold and i wonder if these would damage the aluminium.
Thanks all
Aluminium Tower safety devices
Moderator: Moderators
- bernicarey
- Anorak Extraordinaire
- Posts: 8973
- Joined: Tue Jan 13, 2009 2:50 am
- 15
- Twitter: @bernicarey
- Industry Sector: Consultancy/Training
- Occupation: Safety, Health, Environment and Fire Consultant.
- Location: The heart of the East Midlands...
- Has thanked: 76 times
- Been thanked: 300 times
- Contact:
Re: Aluminium Tower safety devices
I think scaffold towers are designed to be free standing with the appropriate size bracing struts.
Generally, the higher they get the wider they are built.
Max height is around 14-15 mtrs.
But I'll defer to anyone with more experience of them.
Generally, the higher they get the wider they are built.
Max height is around 14-15 mtrs.
But I'll defer to anyone with more experience of them.
-
- Master Craftsman
- Posts: 5398
- Joined: Tue Aug 16, 2005 2:15 pm
- 18
- Industry Sector: Consultancy/Construction/Major Power
- Location: Scotland
- Has thanked: 23 times
- Been thanked: 55 times
Re: Aluminium Tower safety devices
I have never seen a Tower being tied in my years, and have always been freestanding, however you could refer to the PASMA website link below, which has many useful user manuals for the many different types of towers on the market.
https://pasma.co.uk/scaffold-towers/ins ... n-manuals/
https://pasma.co.uk/scaffold-towers/ins ... n-manuals/
- danwel
- Grand Shidoshi
- Posts: 1087
- Joined: Sun Aug 19, 2007 5:37 pm
- 16
- Industry Sector: Oil & Gas
- Occupation: Consultant H&S Advisor / Behavioural Coach
- Location: Whitby, North Yorkshire
- Has thanked: 3 times
- Been thanked: 21 times
- Contact:
Re: Aluminium Tower safety devices
As long as it is built in line with the instructions as suggested above it will be fine. Free standing scaffold towers can be built out of steel or aluminium in your case and perfectly fine.
For me the whole point of the aluminium towers are that they are quick and easy to build and do not necessarily need a scaffold background but do need to have the relevant Pasma qualification. And that if there is a need to go at substantial height then the likelihood is that a regular tube and fitting scaffold will be more appropriate.
One thing worth baring in mind is that they are made out of aluminium and that the wind speed would need to be a factor and for some reason 25mph rings a bell as a speed that work should cease and that around 40mph the aluminium tower should actually be dismantled. Don't quote me on the speeds as its been a while.
i van vaguely remember that the max heights are different for internal and external. It's been years since i have done my Pasma but sure it used to be about 12m internal and 8m external. And again if they are at the max heights it will likely need the stabilisers fitted too so make sure you have all of the components.
For me the whole point of the aluminium towers are that they are quick and easy to build and do not necessarily need a scaffold background but do need to have the relevant Pasma qualification. And that if there is a need to go at substantial height then the likelihood is that a regular tube and fitting scaffold will be more appropriate.
One thing worth baring in mind is that they are made out of aluminium and that the wind speed would need to be a factor and for some reason 25mph rings a bell as a speed that work should cease and that around 40mph the aluminium tower should actually be dismantled. Don't quote me on the speeds as its been a while.
i van vaguely remember that the max heights are different for internal and external. It's been years since i have done my Pasma but sure it used to be about 12m internal and 8m external. And again if they are at the max heights it will likely need the stabilisers fitted too so make sure you have all of the components.
That's how we roll in our house baby!!!
-
- Student
- Posts: 97
- Joined: Mon Jan 15, 2018 11:43 am
- 6
- Has thanked: 4 times
- Been thanked: 25 times
Re: Aluminium Tower safety devices
Thanks guys, and thanks for the link. Very helpful. The first manual i looked at actually did specify tying the scaffold in above a certain height.
(Copied from user manual)
Towers must be tied into a suitable rigid structure once they go beyond the freestanding working heights
specified in EN 1004 2004 - 8m working platform height outdoors and 12m working platform height
indoors - or if the tower is unstable or is in danger of being unstable.
Standard scaffold tubes and fittings can be used with the Alto Access products. Ties should be spaced at
no more than 4m intervals. Ties must be rigid and be secured to both frame uprights. For further details
regarding tying in, please contact your supplier or the manufacturer:
(Copied from user manual)
Towers must be tied into a suitable rigid structure once they go beyond the freestanding working heights
specified in EN 1004 2004 - 8m working platform height outdoors and 12m working platform height
indoors - or if the tower is unstable or is in danger of being unstable.
Standard scaffold tubes and fittings can be used with the Alto Access products. Ties should be spaced at
no more than 4m intervals. Ties must be rigid and be secured to both frame uprights. For further details
regarding tying in, please contact your supplier or the manufacturer: